CONSTRUCTION 

1-1/4" stainless steel 304 pipe stanchion along with stainless steel 9" (22.9cm) diameter floor flange, and 27.9cm diameter stainless steel bowl, provide an unsurpassed durability in a long lasting product. 

QUALITY CONTROL

Entire unit is pre-built and pressure tested to ensure a  leak free installation.

VALVES

Eyewash and shower ball valves are designed to make  the flushing of contaminants occur with the simple pull  of a lever or push of a stainless steel flag. Both valves come equipped with 316 stainless steel ball and stem  to provide greater protection against corrosion and  breakage.

TEMPERATURE CONTROL 

Thermostatically controlled heat traced cable provides  the energy needed to keep the combination shower and eye/face wash at an optimal temperature. 25mm insulation and anti-UV plastic jacket further prevent  freezing down to temperature levels as low as -30° F (-34.4° C) to maintain optimal functioning conditions. 

SHOWER HEAD 

stainless steel drench shower head uses a hydrodynamic design to give equal distribution of water  throughout the entire footprint of flow. 

EYE/FACE WASH 

stainless steel eye/face wash head uses an inverted directional laminar flow to sweep contaminants away from the vulnerable nasal cavity.

INLET SUPPLY: 1-1/4" FNPT 

WASTE SUPPLY: 1-1/4" FNPT 

SHOWER FLOW RATE: >75.7 L/min 

EYE/FACE WASH FLOW RATE: >11.4 L/min 

SUPPLY FLOWING PRESSURE: 30-80 psi

Test Tag: SP170 is a green waterproof test card with space  for date and initials of inspector. Used to record weekly testing of emergency equipment. Large Shower/Eyewash Sign: Model SP178LG large vertical universal combination emergency shower and eyewash  sign. Size: 18" x 24" (45.7 x 61 cm). Valve Freeze Protect Bleed: SP160 opens when the temperature drops to1.7°C, so that the water inside the pipe is discharged. When the temperature raises, SP160  gradually closes. It closes completely when the temperature reaches 5.6°C.

Where the eyes, face, or body of any person may be exposed  to injurious or corrosive materials, suitable facilities for quick  drenching or flushing of the eyes, face, and body shall be  provided within the work area for immediate emergency use.  Unit is ideal for areas where temperature may fluctuate down  to freezing levels as low as -30° F (-34.44° C). Emergency  eye/face wash facilities and deluge showers shall be in  unobstructed and accessible locations that require no more  than 10 seconds for the injured person to reach. Model 8530 is designed and built to meet the ANSI Z358.1  Standard for Emergency Eyewash and Shower Equipment.