CONSTRUCTION 

Reinforced 304 stainless steel booth, with a 1.5cm wall  thickness, provides a solid free standing enclosed  environment for added privacy and stability. Unit also  comes equipped with stainless steel floor grate offering  proper waste drainage, which makes an ideal solution for  clean room. 

QUALITY CONTROL 

Entire unit is pre-built and pressure tested to ensure a leak free installation. 

VALVES 

Eyewash and shower ball valves are designed to make the  flushing of contaminants occur with the simple pull of a lever or push of a stainless steel flag. Both valves come  equipped with 316 stainless steel ball and stem to provide greater protection against corrosion and  breakage. 

SHOWER HEAD 

stainless steel drench showerhead uses a hydrodynamic design to give equal distribution of water throughout the entire footprint of flow. 

EYE/FACE WASH 

stainless steel eye/face wash head uses an inverted directional laminar flow to sweep contaminants away from the vulnerable nasal cavity.

INLET SUPPLY: 1-1/4" FNPT 

WASTE SUPPLY: 1-1/4" FNPT 

SHOWER FLOW RATE: >75.7 L/min 

EYE/FACE WASH FLOW RATE: >11.4 L/min 

SUPPLY FLOWING PRESSURE: 30-80 psi

Test Tag: SP170 is a green waterproof test card with space  for date and initials of inspector. Used to record weekly testing of emergency equipment. 

Shower curtain: Model 9040 is a curtain to add privacy and cleanness.

In an environment where materials need to withstand the  greatest corrosion, where the eyes or body of any person  may be exposed to injurious or corrosive materials,  suitable facilities for quick drenching or flushing of the eyes  and body shall be provided within the work area for  immediate emergency use. Emergency eyewash facilities  and deluge showers shall be in unobstructed and  accessible locations that require no more than 10 seconds  for the injured person to reach.  Model 8540 is designed and built to meet the ANSI Z358.1  Standard for Emergency Eyewash and Shower Equipment.