model 7501T240 240V Tempered, Gravity-Fed, Portable Eyewash
-
FEATURES & BENEFITS
CONSTRUCTION
FDA approved high-density green polyethylene tank provides the light and durable construction required in a portable unit.
MOUNTING
J-shaped stainless steel wall bracket makes for a well constructed portable mount for easy removal and re-mount.
FLOW CONTROLS
Pulling down the eyewash arm will begin flushing the 9-gallon (34.1 L) portable tank at .4 gpm (1.5 L) for a full 15 minutes, creating a full patterned flushing of the eyes.
DESIGN
Tank comes complete with a wide-fill opening and threaded cap for quick inspection, cleaning, and filling. Unit also comes equipped with top and side handles making relocation easy.
TEMPERED WATER
Heated, insulated blanket provides ANSI compliant tempered water in operating temperatures to -30° F (-34° C). Unit will stay tempered in non-extreme outdoor conditions (below 100° F (38° C)). Only tempered portable eyewash in the market.
-
OPTIONS
Water Additive: Model 9082, 'sterile' bacteriostatic preservative for use in portable eyewash stations. One 5 oz. (148 ml) bottle will preserve 5 to 20 gallons (18.9 to 75.7 L) of potable water for up to three months. Four bottles per carton.
Waste Container: Model 9009 is a twenty-gallon (75.7 L) wastewater container constructed of tough yellow polymer resin. Unit is used to collect water during weekly testing of emergency equipment.
-
SPECIFICATIONS
Model 7501T240 is a 9-gallon (34 L), tempered, gravity-fed portable eyewash with a NEMA 4 heated, insulated blanket to provide ANSI compliant tempered water in ambient operating temperatures to -30°F (-34° C). Ideal for remote locations without access to continuous potable water. 240V, 50/60Hz, 2A, 1 phase electrical requirement. Power cord not provided - must install appropriate cord per code. Haz Loc options available. Model 9082 additive not included - order separately.
-
APPLICATIONS
Where the eyes of any person may be exposed to injurious or corrosive materials, when suitable facilities for quick flushing of the eyes needs to be provided and a continuous supply of water is not available. Although the 7501T240 may be installed in a wide variety of locations, it is ideal for remote areas where protective measures are still needed. Emergency eyewash equipment shall be in unobstructed and accessible locations that require no more than 10 seconds for the injured person to reach. IAPMO EGS certified to ANSI/ISEA Z358.1 - CSA C22.2 No. 88, UL499 and UL 1951